JIAXING PASSION NEW ENERGY TECHNOLOGY CO., LTD.
JIAXING PASSION NEW ENERGY TECHNOLOGY CO., LTD. Solar Water Heater, Solar Collector, Flat Panel manufacturer
Add to Cart
Black Coating U Pipe Solar Collector 30 Tube Rockwool Polyurethane Insulation
Specifications
solar keymark collector
1. Certificate: Solar keymark & SRCC
2. Anti-freeze Max. Minus 50
3. 10 years warranty
Basic information of U Pipe Solar Collector
U Pipe Solar collector is a collector designed for balcony.
It is widely used for tall buildings in China.
It combined with building perfectly. The collector consist of manifold, manifold box, rockwool insulation, U pipe, aluminum fin, vacuum tube and frame.
Tube
Tube size: 58-1800
Tube quantity: 10tubes
Tube coating: ALN/SS-ALN/CU
Absorption coefficient: ≥ 94%
Emission coefficient: ≤ 7%
Manifold box: Aluminum alloy
Frame: Aluminum alloy
U Pipe: 8mm diameter red copper
Installation
1) It must be installed by qualified person
2) It must be installed on South balcony
3) The design is for horizontal. The tube should be same as horizontal direction.
The working principle of solar collector is very simple:
1. Solar Absorption:
Solar radiation is absorbed by the evacuated vacuum tubes and converted into heat.
2. Solar Heat Transfer:
The liquid from manifold will flow into U pipes.
The U pipe is heated inside vacuum tube.
So the liquid will be heated inside U Pipe and back to the manifold.
3. Solar Energy Storage:
The controller will monitor there is heat energy available when the liquid was heated and back to manifold.
Then controller will start pump to circulate the energy to water tank.
| Type | PT01-10 | PT01-15 | PT01-20 | PT01-25 | PT01-30 | PT01-15B | PT01-30B |
| Number of tubes | 10 | 15 | 20 | 25 | 30 | 15 | 30 |
| Gross area (m²) | 1.63 | 2.40 | 3.17 | 3.93 | 4.70 | 1.33 | 2.42 |
| Aperture area (m²) | 0.94 | 1.41 | 1.88 | 2.35 | 2.82 | 0.63 | 1.30 |
| Absorber area (m²) | 0.805 | 1.24 | 1.65 | 2.06 | 2.48 | 0.54 | 1.08 |
| Peak power (W / Collector) | 659 | 900 | 1199 | 1499 | 1799 | 450 | 900 |
| Allowable operating pressure (bar) | 6 | 6 | 6 | 6 | 6 | 6 | 6 |
| Test pressure (bar) | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
| Max. stagnation temperature | 232°C | 200°C | 200°C | 200°C | 200°C | 200°C | 200°C |
| Max. operating temperature | 95°C | 95°C | 95°C | 95°C | 95°C | 95°C | 95°C |
| Flow rate (l / m2h) | 50-150 | 50-150 | 50-150 | 50-150 | 50-150 | 50-150 | 50-150 |
| Absorber material | CU/AI/SS/N2 Borosilicate glass | ||||||
| Coating | ALN/SS-ALN/CU | ||||||
| Absorption coefficient | ≥ 94% | ≥ 94% | ≥ 94% | ≥ 94% | ≥ 94% | ≥ 94% | ≥ 94% |
| Emission coefficient | ≤ 7% | ≤ 7% | ≤ 7% | ≤ 7% | ≤ 7% | ≤ 7% | ≤ 7% |
| Weight (kg) | 36.4 | 55 | 77 | 96 | 116 | 32 | 65 |
| Liquid content | 0.62L | 0.93L | 1.24L | 1.55L | 1.82L | 0.93L | 1.82L |
| Mounting angle | 15 - 75° | 15 - 75° | 15 - 75° | 15 - 75° | 15 - 75° | 15 - 75° | 15 - 75° |
| Frame | 2mm Aluminum Alloy | ||||||
| Heat pipe | 8mm red copper | ||||||
| Long-term stable vacuum (Pa) | <5*10-3 | <5*10-3 | <5*10-3 | <5*10-3 | <5*10-3 | <5*10-3 | <5*10-3 |
| Glass tube diameter | 58mm | 58mm | 58mm | 58mm | 58mm | 58mm | 58mm |
| Vacuum tube wall thickness | 1.6mm | 1.6mm | 1.6mm | 1.6mm | 1.6mm | 1.6mm | 1.6mm |
| Insulation | Compressed Rockwool | ||||||
| Collector width | 800mm | 1175mm | 1550mm | 1925mm | 2300mm | 1175mm | 2300mm |
| Collector length | 2043mm | 1200mm | |||||
| Manifold | 38mm red copper | ||||||
| Tube length | 1800mm | 850mm | |||||
| Pressure drop | <5mbar(80L/h), 12mbar (150L/h) | ||||||
Remark
1. U pipe vacuum tube solar collector
2..Max.service temperature (degree):95°
3. Mainfold connection :22mm
4. Max. stagnation temperature (degree)252°
5. Test temperature (Pa):1Mpa
FAQ:
Q1: Can I have a sample for testing?
A: Actually we think samples are not very important.You can buy from anywhere.
But we think our goods will better then any others.
Samples will be 10% higher then the cargo.
Q2: Can I add my logo on the Solar water heaters?
A: Yes,OEM and ODM are available for us.
But you should send us the Trademark authorization letter.
Q3: How can i get the after-service?
A: We will send you the spare parts by free if the problems caused by us.
If it is the men-made problems,we also send the spare parts,but you should pay.
For our range hood motors it is 3-5 years free maintenance.
Q4: Can I have a visit to your factory before the order?
A: Sure,welcome to visit our factory.
