JIAXING PASSION NEW ENERGY TECHNOLOGY CO., LTD.
JIAXING PASSION NEW ENERGY TECHNOLOGY CO., LTD. Solar Water Heater, Solar Collector, Flat Panel manufacturer
Add to Cart
Solar Vacuum Tube Collector High Pressured Heat Pipe Solar Collector Closed Loop Collector Pressurized Solar Panels
Advantage:
• Material of manifold is SUS304 stainless steel or aluminum alloy
• Copper heat pipe for rapid heat transfer.
• Max Pressure bearing: 8bar.
• ISO9001 / CE certificate/EN-12975.
• 5 years warranty.
• Corrosion resistant brazed copper header.
• Attractive design, standard frame suitable for pitched roof or flat roof .
• Easy plug-in installation.
• Improves the environment and save your fuel cost.
Solar collector specification:
1. Manifold (interior): 0.8mm thickness Red copper
2. Manifold (exterior): 2. Mm thickness Aluminum alloy
3. Glass tube dimensions: 58mm x 1.800mm
4. Insulation layer: 45mm thickness glass fiber /polyurethane layer
5. Heat preservation: 72-96hrs
6. Hail resistance: 25mm
7. Max pressure: 6 bar
8. Coating of vacuum tube: Ss-c/cu
9. Frame: 2.0mm thickness Aluminum Alloy
Key features
• Modular “plug ‘n’ play” design (Manifold, frame and tubes in separate packages)
• Lightweight manifold design
• Choice of Stainless Steel or Anodized Aluminum mounting frames
• Extremely reliable header design due to only 6 brazing joints
• Contoured header for turbulent flow even at low flow-rates
• All glass wool insulation for high temperature stability
• Patented heat transfer fin design for optimal heat transfer
• Long term stability under extreme conditions
• Extreme cold (freeze protected heat pipes)
• Coastal regions (salt spray)
• Harsh UV radiation (UV stabilized components)
• High Winds (up to category C cyclone)
• Snow loading
Technical datas:
| Model | PT-C-15 | PT-C-18 | PT-C-20 | PT-C-24 | PT-C-25 | PT-C-30 |
| Tube QTY(PCS) | 15 | 18 | 20 | 24 | 25 | 30 |
| Three Target Vacuum Tube | Diameter/Length: φ58mm/1800mm; High boron and silicon content 3.3; Structure:Gradual change SS-AL-Nx/Cu selective absorption coating; Vacuum Degree:P<=5*10-3; | |||||
| Heat Pipe | Condesor: φ14/φ24*70mm ; Thickness: 0.5mm ; Material: red copper TU1+water; Transfer Power:>=150W; Working Pressure:4Mpa; Welding Pressure:4Mpa; | |||||
| Outer Shell/Bracket | Alluminum Alloy,Silver | |||||
| Insulation Layer | Rock wool | |||||
| Dustproof Rubber | EPDM | |||||
| Dsily Heat Gain | 8.5MJ/m² | |||||
| Work Pressure | 0.6MPa | |||||
| Inlet/outlet | 22mm/3/4" | |||||
| Tailstock | ABS | |||||
| Temperature | 250 °С | |||||
| Contour Aperture Area | 2.32m² | 2.75m² | 3.10m² | 3.64m² | 3.78m² | 4.52m² |
| Aperture Area | 1.43m² | 1.70m² | 1.89m² | 2.27m² | 2.36m² | 2.83m² |
| Absorption Area | 1.22m² | 1.46m² | 1.62m² | 1.95m² | 2.04m² | 2.43m² |
